Communicate with Supplier? Supplier
richard Mr. richard
What can I do for you?
Contact Supplier

SHANDONG PIPESOL FLOW EQUIPMENT CO.,LTD

Ductile Iron Locked Gate Valve - manufacturer, factory, supplier from China

(Total 24 Products for Ductile Iron Locked Gate Valve)

  • Magnetic Encrypted Security Gate Valve

    Magnetic Encrypted Security Gate Valve

    • Brand: PSL

    • Packaging: wooden case

    • Supply Ability: 5000 sets/month

    • Min. Order: 10 Set/Sets

    About Magnetic Encrypted Security Gate Valve Magnetic encrypted security gate valve is a new high tech products which be made with special accessories be based on probability and coding by computer This kind of gate valve is widely used in domestic water and sewage treatment system is a kind of effective management...

    Contact Now

  • Ductile iron flanged tee

    Ductile iron flanged tee

    Repair clamps can be designed to withstand low medium and high pressure applications The repair clamp can be supplied with a ring seal for located damage or a full waffle mat with stainless steel side armour for added protection They can be installed on the pipeline without the need for a costly shut down using...

    Contact Now

  • Soft Seated Gate Valve

    Soft Seated Gate Valve

    SHANDONG PIPESOL is a high tech professional manufacturer for water supply and drainage valves and pipe fittings the main valves are non rising stem resilient seated wedge gate valves hivent double orifice air release and vacuum valves combined valve tees double eccentric center butterfly valves and so on Our gate...

    Contact Now

  • Double Flanged  Eccentric  Butterfly Valve

    Double Flanged Eccentric Butterfly Valve

    • Model No.: DN300-DN2000

    DN DN50 DN2000 2 PN PN10 PN16 3 Design Standard BS5155

    Contact Now

  • Ductile  iron repair clamp

    Ductile iron repair clamp

    • Packaging: Wooden Pallent

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN300

    • Transportation: Ocean,Land,Air

    Type test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 About EasiRange Universal Wide Tolerance Repair CLamp With 2 Inches Boss Prepare the pipe surface ensuring that the main is free from loose surface deposits mud rust etc When being installed on bitumen coated...

    Contact Now

  • Ductile Iron Mopvc end  cap

    Ductile Iron Mopvc end cap

    • Model No.: ON50-ON500

    Type test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GLS QT 450 10 Coating WIS4 52 01 Standard EN12842 About PVC Pipe Fittings Ductile Iron MOPVC End Cap And Casing Cap For PVC Pipe With WRAS Approved Our company supply ductile iron pipe fittings and PVC fittings our ductile iron end cap is...

    Contact Now

  • Mopvc all socket  cross Ductile Iron

    Mopvc all socket cross Ductile Iron

    • Model No.: OD75-OD315

    Type test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJSQT 450 10 Coating WIS4 52 01 Standard EN12842 About Ductile Iron All Flanged Cross Tee Ductile iron all flanged cross is used for water pipeline with external coated is rich zinc plus bituminous paint and internal coated is cement mortal...

    Contact Now

  • Ductile  Iron Double Flanged Duckfoot Bend-90°

    Ductile Iron Double Flanged Duckfoot Bend-90°

    • Packaging: Wooden cases

    • Min. Order: 10 Bag/Bags

    • Model No.: DN50-DN600

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 Ductile Iron Bend Ductile Iron Tee duckfoot bend Elbow Flange short Pipe Flange adaptor couplings Flange Flange convertor Dismantling Joint Ductile Iron Bend Ductile Iron Tee Cross Elbow...

    Contact Now

  • Ductile  Iron  Manhole Cover

    Ductile Iron Manhole Cover

    Ductile Iron BSEN1563EN GJS QT 450 10 Ductile Iron Manhole Cover With Frame Ductile Iron Frames And Grates Ductile Iron Bend Ductile Iron Tee duckfoot bend Elbow Flange short Pipe Flange adaptor couplings Flange Flange convertor Dismantling Joint Ductile Iron Bend Ductile Iron Tee Cross Elbow Dismantling joint Ductile...

    Contact Now

  • Ductile Iron Double Flanged Bend-90°

    Ductile Iron Double Flanged Bend-90°

    • Model No.: DN80-DN1800

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling EN1092 2 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw...

    Contact Now

  • Ductile iron Dismantling   joint

    Ductile iron Dismantling joint

    • Model No.: DN50-DN1200

    Type Test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec About Large Diameter All Flanged Dismantling joint The installation is also straightforward using just a spanner and torque wrench to tighten the high tensile steel or stainless steel tie bars With...

    Contact Now

  • Ductile  Iron Double Socket/Socket Spigot Bend-45°

    Ductile Iron Double Socket/Socket Spigot Bend-45°

    • Packaging: Wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN1200

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material Ductile Iron Standard...

    Contact Now

  • Ductile  Iron Universal Straight Coupling

    Ductile Iron Universal Straight Coupling

    • Model No.: DN50-DN700

    About Light Duty Universal Wide Tolerance Coupling PN10 PN16 Wide tolerance universal couplings include both flexible fittings that allow for expansion contraction and movement and fully restrained versions that remove the need for expensive thrust blocks to accommodate forces due to internal pressure in pipes...

    Contact Now

  • Ductile Iron Double Flanged  Bend Joint

    Ductile Iron Double Flanged Bend Joint

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material...

    Contact Now

  • Double Socket Spigot Bend Ductile Iron

    Double Socket Spigot Bend Ductile Iron

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BS EN598 545 ISO2531 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material Ductile Iron Standard...

    Contact Now

  • Ductile Iron Pipe Fotting Stainer

    Ductile Iron Pipe Fotting Stainer

    • Model No.: DN15-DN500

    DN dn15 dn500 PN pn16 Design standard din3352 Face to face length din3202 f1 rubber standard en681 2 Ductile lron bsen1563en gjs QT 450 10 Coating wis4 52 01 Drilling spec en1092 2 About NeoType Water Pipeline Y Type Strainer The Y strainers are installed in water systems to filter out pebbles and other impurities...

    Contact Now

  • double flangedDuctile iron bend 90°

    double flangedDuctile iron bend 90°

    • Packaging: wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN80-DN1800

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling spec EN1092 2 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw...

    Contact Now

  • Ductile  Iron Double All Flanged Tee

    Ductile Iron Double All Flanged Tee

    • Model No.: DN80-DN400

    Type Test EN14525 BS8561 Ductile Iron BSEN1563EN GJS QT 45 10 Coating WIS 52 01 Standard BSEB598 545 ISO2531 Drilling Spec EN1092 2 About Ductile Iron All Flanged Tee Ductile Iron Flanged Tee RAYTHAI produce ductile iron all flanged tee with the premium quality raw materials The range of all Flanged tee is from DN80...

    Contact Now

  • Ductile Iron Bend Ductile Iron Tee

    Ductile Iron Bend Ductile Iron Tee

    • Packaging: Wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN600

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Rubbre Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw materials ensure high...

    Contact Now

  • Ductile  Iron Flanged Short Pipe

    Ductile Iron Flanged Short Pipe

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 Product categories of Flanged Short Pipe we are specialized manufacturers from China Flanged Short

    Contact Now

  • Ductile Iron All Flangged Tee

    Ductile Iron All Flangged Tee

    • Packaging: Wooden Pallent

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN1200

    • Transportation: Ocean,Land,Air

    Type Sest EN14525 BS8561 Ductile Lron BSEN1563EN GJS QT 450 10 Conting WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec en1092 2 About Ductile Iron Double Socket Tee With Flanged Branch Ductile iron double socket tee with flanged branch is prodced with ductile iron EN GJS 450 10 with bituminous paint and cement...

    Contact Now

  • Ductile iron double socket/socket  bend-45°

    Ductile iron double socket/socket bend-45°

    • Model No.: DN50-DN1200

    Type Test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material Ductile Iron Standard...

    Contact Now

  • Ductile Iron Double Flanged Bend-11.25°

    Ductile Iron Double Flanged Bend-11.25°

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec en1092 2 About Ductile Iron 11 25 Deg Double Flanged Bend We produce 11 25 Deg double flanged bend with Ductile iron EN GJS 450 10 in order to ensure the product s...

    Contact Now

  • Ductile Iron Flanged Short Pipe

    Ductile Iron Flanged Short Pipe

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Ductile Lron BSEN1563EN GJS QT 450 10 Coatinng WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1029 2 Product categories of Flanged Short Pipe we are specialized manufacturers from China Flanged Short Pipe Flanged Short Seamless Pipe suppliers factory wholesale high quality products of...

    Contact Now

Review

Mr.javier Ferre

Mar 27, 2020 5

Contented with the Ductile Iron Locked Gate Valve price.
Helen Moore

Mar 13, 2020 5

Excellent deal, thank you. I’m satisfied.
Mohamad Hallal

Mar 10, 2020 5

Shipped quickly, track the parcel all the way. And Ductile Iron Locked Gate Valve is packaged so well, nothing broke on the road. Excellent.
  • Related Information
It can be our responsibility to satisfy your requirements and successfully serve you. Your pleasure is our greatest reward. We've been searching forward for your check out for joint expansion for Ductile Iron Locked Gate Valve , Ductile Iron Pipe Gate Valve , Ductile Iron Flanged Gate Valve , We've been self-confident that there will be considered a promising upcoming and we hope we could have long term cooperation with prospects from all over the environment.
We have now probably the most innovative production equipment, experienced and qualified engineers and workers, regarded high quality control systems and also a friendly expert income team pre/after-sales support for Ductile Iron Locked Gate Valve , Ductile Iron Pipe Gate Valve , Ductile Iron Flanged Gate Valve , We have been very responsible for all details on our customers order no matter on warranty quality satisfied prices quick delivery on time communication satisfied packing easy payment terms best shipment terms after sales service etc. We provide one-stop service and best reliability to our every customers. We work hard with our customers colleagues workers to make a better future.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

richard

Mr. richard

Email:

richard@sinopipesol.com

Send Inquiry

Tel:86-536-6350678

Fax:86-536-6350678

Mobile Phone:+8615864590268Contact me with Whatsapp

Email:richard@sinopipesol.com

Address:High-tech Industrial Park,Mizhou East Road,Zhucheng City, Weifang, Shandong

Mobile Site