Communicate with Supplier? Supplier
richard Mr. richard
What can I do for you?
Contact Supplier

SHANDONG PIPESOL FLOW EQUIPMENT CO.,LTD

90 Deg Ds Bend - manufacturer, factory, supplier from China

(Total 24 Products for 90 Deg Ds Bend)

  • 90 deg PVC Flexible Double Socket Bend

    90 deg PVC Flexible Double Socket Bend

    • Brand: PSL

    • Packaging: Wooden Pallent

    • Supply Ability: 5000 pieces/month

    • Min. Order: 50 Piece/Pieces

    About PVC Pipe Fittings Ductile Iron Flexible Double Socket Bend Using PVC pipe to switch connection Every socket part is assembled with EPDM rubber gasket to insure seamlessness of connection between PVC pipes and fittings The using method is very convenient As each product is equipped with EPDM gasket just insert...

    Contact Now

  • Mopvc double  socket  bend

    Mopvc double socket bend

    • Model No.: ON50-ON350

    Type test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard EN12842 About 22 5 Deg MOPVC Double Sokcet Bend In recent years MOPVC pipes PE pipes PVC pipes and fittings are used more and more widely because they are light anticorrosion and cheaper than iron pipes...

    Contact Now

  • Ductile  Iron Double Flanged Duckfoot Bend-90°

    Ductile Iron Double Flanged Duckfoot Bend-90°

    • Packaging: Wooden cases

    • Min. Order: 10 Bag/Bags

    • Model No.: DN50-DN600

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 Ductile Iron Bend Ductile Iron Tee duckfoot bend Elbow Flange short Pipe Flange adaptor couplings Flange Flange convertor Dismantling Joint Ductile Iron Bend Ductile Iron Tee Cross Elbow...

    Contact Now

  • Ductile Iron Double Flanged Bend-90°

    Ductile Iron Double Flanged Bend-90°

    • Model No.: DN80-DN1800

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling EN1092 2 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw...

    Contact Now

  • Ductile  Iron Double Socket/Socket Spigot Bend-45°

    Ductile Iron Double Socket/Socket Spigot Bend-45°

    • Packaging: Wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN1200

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material Ductile Iron Standard...

    Contact Now

  • Ductile Iron Double Flanged  Bend Joint

    Ductile Iron Double Flanged Bend Joint

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material...

    Contact Now

  • Double Socket Spigot Bend Ductile Iron

    Double Socket Spigot Bend Ductile Iron

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BS EN598 545 ISO2531 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material Ductile Iron Standard...

    Contact Now

  • double flangedDuctile iron bend 90°

    double flangedDuctile iron bend 90°

    • Packaging: wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN80-DN1800

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling spec EN1092 2 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw...

    Contact Now

  • Ductile Iron Bend Ductile Iron Tee

    Ductile Iron Bend Ductile Iron Tee

    • Packaging: Wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN600

    • Transportation: Ocean,Land,Air

    Type Test EN14525 BS8561 Rubbre Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw materials ensure high...

    Contact Now

  • Ductile iron double socket/socket  bend-45°

    Ductile iron double socket/socket bend-45°

    • Model No.: DN50-DN1200

    Type Test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772 Material Ductile Iron Standard...

    Contact Now

  • Ductile Iron Double Flanged Bend-11.25°

    Ductile Iron Double Flanged Bend-11.25°

    • Model No.: DN80-DN2000

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec en1092 2 About Ductile Iron 11 25 Deg Double Flanged Bend We produce 11 25 Deg double flanged bend with Ductile iron EN GJS 450 10 in order to ensure the product s...

    Contact Now

  • MOPVC Douctile Iron Socket Bend

    MOPVC Douctile Iron Socket Bend

    • Model No.: ON50-ON350

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1568EN GJS QT 450 10 Coating WIS4 52 01 Standard EN12842 About 11 25 Deg MOPVC Double Socket Bend With the development of sicence and technology such as the usage of PVC pipes MOPVC pipes and PE pipes and fittings increase PVC pipes MOPVC pipes and PE...

    Contact Now

  • MOPVC Double Socket Bend Ductile Iron

    MOPVC Double Socket Bend Ductile Iron

    • Model No.: ON50-ON350

    Type test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard EN12842 MOPVC Pipe Fitting Repair clamps can be designed to withstand low medium and high pressure applications The repair clamp can be supplied with a ring seal for located damage or a full waffle mat...

    Contact Now

  • Double Flanged Duckfoot Bend

    Double Flanged Duckfoot Bend

    Type Test EN14525 BS8561 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 Ductile Iron Bend Ductile Iron Tee duckfoot bend Elbow Flange short Pipe Flange adaptor couplings Flange Flange convertor Dismantling Joint Ductile Iron Bend Ductile Iron Tee Cross...

    Contact Now

  • Ductile  Iron Double Flanged Bend-90°Pipe Fitting

    Ductile Iron Double Flanged Bend-90°Pipe Fitting

    • Model No.: DN80-DN1800

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling Spec EN1092 2 Type Test EN14525 BS8561 Rubbre Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 About Ductile Iron Double...

    Contact Now

  • Ductile  iron double flanged bend-11.25°

    Ductile iron double flanged bend-11.25°

    • Packaging: wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN50-DN1200

    • Transportation: Ocean,Land,Air

    Type test EN14525 BS8561 Rubber standard EN681 2 Ductile lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BSEN598 545 ISO2531 Drilling spec EN1092 2 About Ductile Iron 11 25 Deg Double Flanged Bend We produce 11 25 Deg double flanged bend with Ductile iron EN GJS 450 10 in order to ensure the product s...

    Contact Now

  • Ductile Iron Flanged  90  Pipe Fittings

    Ductile Iron Flanged 90 Pipe Fittings

    • Model No.: DN80-DN1800

    Type Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Iron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Standard BS EN598 545 ISO2531 Drilling Spec EN1092 2 About Ductile Iron Double Flanged Bend With Long

    Contact Now

  • Ductile Iron Socket Bend For PVC

    Ductile Iron Socket Bend For PVC

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 Product

    Contact Now

  • Ductile Iron  Double Flanged Duckfoot Bend-90°

    Ductile Iron Double Flanged Duckfoot Bend-90°

    • Model No.: DN80-DN1200

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 Ductile Iron Bend Ductile Iron Tee duckfoot bend Elbow Flange short Pipe Flange adaptor couplings Flange Flange convertor Dismantling Joint Ductile Iron Bend Ductile Iron Tee Cross Elbow...

    Contact Now

  • Ductile iron double flanged bend-22.5

    Ductile iron double flanged bend-22.5

    • Packaging: wooden cases

    • Min. Order: 10 Piece/Pieces

    • Model No.: DN80-DN2000

    • Transportation: Ocean,Land,Air

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 About Ductile Iron 45 Deg Double Flanged Bend 45 Deg double flanged bend is widely installed in

    Contact Now

  • Double Flange Duck Foot Bend

    Double Flange Duck Foot Bend

    • Model No.: DN80-DN1800

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 About Ductile Iron Double Flanged Bend With Long Radius Medium Radius or Nomal Radius RAYTHAI ductile iron double flanged bend is produced with high quality raw materials ensure high...

    Contact Now

  • Ductile Iron Double Socket Spigot Bend

    Ductile Iron Double Socket Spigot Bend

    • Model No.: DN80-DN2000

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 About Ductile Iron Long Medium Flanged Bend Material Ductile Iron Standard ISO2531 BS EN545 Range 80mm 2000mm K 12 Standards ISO2531 EN545 EN598 BS4772

    Contact Now

  • Ductile Iron Double Flanged Bend -11.25°

    Ductile Iron Double Flanged Bend -11.25°

    • Model No.: DN80-DN2000

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 A range of mechanical couplings and flange adaptors for all weather and site conditions providing a quick easy way of joining or repairing PE pipe connections They offer full end restraint...

    Contact Now

  • Double Iron Bend Flanged Duckfoot

    Double Iron Bend Flanged Duckfoot

    • Model No.: DN80-DN1200

    ype Test EN14525 BS8561 Rubber Standard EN681 2 Ductile Lron BSEN1563EN GJS QT 450 10 Coating WIS4 52 01 Drilling spec EN1092 2 Ductile Iron Bend Ductile Iron Tee duckfoot bend Elbow Flange short Pipe Flange adaptor couplings Flange Flange convertor Dismantling Joint Ductile Iron Bend Ductile Iron Tee Cross Elbow...

    Contact Now

Review

Paramjeet Singh

Feb 21, 2020 5

Highly recommend. Professional 90 Deg Ds Bend manufacturer. PSL could offer a solution immediately when I had problems. A buy without regretted.
Makoto Ogasawara

Feb 07, 2020 5

The 90 Deg Ds Bend agrees with the specified. I recommend this seller.
Shelly Maclean

Feb 05, 2020 5

It’s awesome. Exactly 90 Deg Ds Bend what I asked for.
  • Related Information
"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for 90 Deg Ds Bend , 90 Deg DF Bend , 90 Deg Duckfoot Bend , We're looking ahead to establishing long-term business enterprise associations along with you. Your remarks and recommendations are really appreciated.
"""Control the standard by the details, show the energy by quality"". Our business has strived to establish a really efficient and stable personnel team and explored an effective high quality manage process for 90 Deg Ds Bend , 90 Deg DF Bend , 90 Deg Duckfoot Bend , We can customize the products according to your requirements and we can pack it for you when you order.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Send Inquiry

richard

Mr. richard

Email:

richard@sinopipesol.com

Send Inquiry

Tel:86-536-6350678

Fax:86-536-6350678

Mobile Phone:+8615864590268Contact me with Whatsapp

Email:richard@sinopipesol.com

Address:High-tech Industrial Park,Mizhou East Road,Zhucheng City, Weifang, Shandong

Mobile Site